Jeti Tauro H2500 LED
|
|
|
|
Models
|
|
|
|
| Four configurations, depending on the applications that you run. |
|
|
| Jeti Tauro H2500 LED 6C – 6 colors (24 heads) |
|
|
| Jeti Tauro H2500 LED 6C W4 – 6 colors and white (28 heads) |
|
|
| Jeti Tauro H2500 LED 6C W8 – 6 colors and white (32 heads) |
|
|
| Jeti Tauro H2500 LED 6C W4 P2 – 6 colors, white and primer (30 heads) |
|
|
Media & printing specifications
|
|
|
|
Sheets & boards
|
|
|
|
| Maximum width |
2.54 m |
|
|
| On the ABF and unloader: 2.54 m |
|
|
| Maximum length |
4.0 m |
|
|
| With 3/4 automation: up to 1.85 m (up to 4 m in bypass mode ) |
|
| Minimum size |
DIN A3, 29.7 x 42 cm (11.7 x 16.1”) |
|
|
| Smallest boards on the ABF: 500 x 700 mm (portrait) |
|
| Thickness |
Min. 0.2 cm – max. 5 cm (media-dependent) |
|
|
| Maximum weight |
10 kg/m² with a maximum of 60 kg evenly distributed over the table |
|
| On the ABF: maximum weight 10 kg/m² with a total of 43 kg |
|
| Sheets: from 200 gr/m² and up |
|
|
| Borderless printing |
Yes. Also in combination with parallel board printing. |
|
Roll-to roll
|
|
|
|
|
Integrated RTR
|
Master single roll
|
Master dual roll
|
| Maximum width |
2.54 m |
2.54 m |
1.22 m |
| Minimum width |
33 cm |
|
|
| Maximum length |
Full roll length (depends on total roll thickness, diameter and weight) |
|
| Thickness |
Min. 0.2 mm – max. 3.2 mm |
|
|
| Maximum weight |
100 kg |
700 kg (depending on the roll width) |
|
| (mounted at the center of the shaft) |
|
| Maximum roll outside diameter |
360 mm |
600 mm |
|
| Roll mounting |
Pneumatic shafts for 76.2 mm – 3” (standard) |
Pneumatic shafts for 76.2 mm – 3” (standard) |
|
| Ask for 6” pneumatic shafts ABC code and availability |
| Borderless printing |
Yes, with protection paper or tape on the belt |
|
|
| Double-sided printing |
No provisions available for registration in double-sided printing |
|
Productivity (for ABF dependent on size and number of boards)
|
|
|
| Express mode |
Up to 275 m²/h |
|
|
| Media |
|
|
|
| Media types |
Rigid as well as flexible media (check with your local Agfa representative for a detailed list) |
|
Print heads & inks
|
|
|
|
| Print heads |
Piezoelectric Ricoh MH |
|
|
| Inks |
CMYKLcLm + white and primer |
|
|
Image & text quality
|
|
|
|
| Image quality |
Resolution up to 1200 dpi |
|
|
| Text quality |
4 point |
|
|
Engine dimensions & weight
|
|
|
|
| Printer dimensions (H x W x L) |
2.0 m x 1.92 m x 6.83 m |
|
|
| ABF dimensions (H x W x L) |
1.1 m x 2.96 m x 2.26 m without extension |
|
|
| 1.1 m x 2.96 m x 3 m with extension |
|
|
| Unloader dimensions (H x W x L) |
1.6 m (max.) x 3.2 m x 4.6 m |
|
|
| Flatbed printer with roll-to-roll unit weight |
4100 kg |
|
|
| ABF weight |
1100 kg |
|
|
| Unloader weight |
1120 kg |
|
|
Room conditions
|
|
|
|
| Temperature |
Between 16-25°C |
|
|
| Relative humidity |
Between 40-60% |
|
|
Electricity & compressed air
|
|
|
|
| Electricity |
Engine: 400-480 VAC, 3-phase, 50/60 Hz, 63A |
|
|
| ABF: 400-480 VAC, 3-phase, 50/60 Hz, 32A |
|
|
| Compressed air |
Min. 6 bar (87 PSI) (also for ABF and unloader) |
|
|
System integration RIP/workflow software
|
|
|
| Asanti, StoreFront, PrintSphere, third-party RIPs |
|
|
